Motorola E360

Manual Configuration of GPRS
• Start these instructions from the idle screen display of the handset
• Press `Menu` (between `phone book` and `Message`)
• Press the up arrow key 2 times to `Settings` and press `Select`
• Scroll down to `WAP profile` and press `Select`
• Scroll down to `Set GPRS` and press `Select`
• Scroll to `GPRS On` and press `Select`
• Scroll to `Set Profile` and press `Select`
• Scroll down to the 2nd slot and press `Select`
• Scroll to `Rename` and press `Select`
• Enter ISAT-GPRS and press `Ok`
• Scroll to `Edit` and press `Select`
• Scroll to `Bearer Type` and press `Select`
• Scroll to `GPRS` and press `Select`
• Scroll to `User Name` and press `Select`
• Enter indosat and press `Ok`
• Scroll to `Password` and press `Select`
• Enter indosat and press `Ok`
• Scroll down to `Apn` and press `Select`
• Enter indosatgprs and press `Ok`
• Press `Back` twice
• Scroll down to `WAP Settings` and press `Select`
• Scroll to `Primary IP` and press `Select`
• Enter 10.19.19.19 and press `Ok`
• Scroll down to `Homepage` and press `Select`
• Enter http://wap.indosat.com/ and press `Ok`
• Press `Back` twice
• Scroll to `Set default` and press `Select`
• Press `Back`. You will notice a tick beside `ISAT-GPRS`. This shows you that `ISAT-GPRS` is the default setting used for GPRS
• Press `Back` 3 times, then press `Exit` to go to the main idle screen of the handset
--
Activation Manual Configuration of GPRS
• Start from the idle screen display of the handset
• Press `Menu` (Button between `Phone Book` and `Message`)
• Press up arrow key 2 times to go to `Settings` and press `Select`
• Scroll down to `WAP Profile` and press `Select`
• Scroll down to `Set GPRS` and press `Select`
• Scroll to `GPRS On` and press `Select`
• Scroll to `Set Profile` and press `Select`
• Scroll to `ISAT-GPRS` and press `Select`
• Scroll to `Set default` and press `Select`
• Press `Back`. There should be a tick beside `ISAT-GPRS` to tell you that it is the default setting used for GPRS
• Press `Back` 3 times followed by `Exit` to return to the idle screen display of the handset